Wet & Dry Inflatable Water Zone

$999.00
Out of stock
Product Id
9116A

Slide, Splash and Jump on the wet & dry inflatable water zone

Where to Buy
Description

The ultimate inflatable water zone which can be used in summer or winter. In summer, the kids can enjoy the large curved slide, pool and water cannon, while in winter the kids can enjoy the generous sized jumping area. The Wet & Dry Inflatable Water Zone will be a family favourite.

This item can be used with or without water. Like all our Happy Hop range it is constructed with a heavy duty 3 layered PVC material on the high traffic areas (Climb area and Slide). Unlike many other products on the market this helps to ensure years of entertainment for the little ones. Trust Happy Hop.

Features & Accessories

  • Large curved slide
  • Massive pool area
  • Spacious jumping area
  • Water cannon
  • Wet and Dry
  • Easy set up and take down. Inflates in less than a minute
  • Australian approved and certified Happy Hop inflatable with a 12 month manufacturer's warranty
  • Powered by a constant flow electric air blower to ensure it remains inflated during play time
  • XXLarge carry bag for easy storage and transportation
  • Repair kit and instructions
  • Ground stakes/pegs for securing the inflatable
  • Water jet set and hose connection

Domestic use only, strictly not for rental or commercial use. 
**Setup of inflatable in video is using a sample model**

Size Guide

Approx. Inflated dimensions:

• Length 5.60m

• Width 4.60m

• Height 2.90m

Manufacturers recommendations:

• Max. weight per player: 45kg

• Max. total weight on inflated area: 180kg (excluding splash pool)

• Max. players: 4

Quality & Materials

Material - High-quality PVC

Our Happy Hop jumping castles and inflatables are made of high quality laminated PVC, which resists tears due to the stretchy nature of the material which is far superior to many of our competitors. The 3 ply material used means the product is durable which is important as kids will be jumping and sliding on them for hours on end.

Safety Design - Extra steps and cushions

Our Happy Hop jumping castles and inflatables have been carefully designed with extra cushioning. The extra cushioning on the inflatables are made to measure to ensure kids are always protected when bouncing, playing or sliding. Our products undertake extensive quality control testing to ensure all of our products are safe.

Certifications

Our Happy Hop jumping castles and inflatables comply with Australian standards and all heavy-duty inflatable bouncers comply with all inflatable safety standards.

Stitching - 3 layers

Our jumping castles and inflatables are made with double to quadruple stitching to ensure maximum durability. We pride ourselves on providing quality stitching as most jumping castles in the industry are only double stitched.

Setup Instructions

*Please note the video is showing a different product however the set up is still the same.

Step 1 : Review ground where product will be placed
Ensure the ground where you will place the product is on a soft level and free from any sharp objects and debris. Remove product from carry bag and place the product as close to the power source as possible.

Step 2 : How to use the blower
Stretch the inflation tube and attach it to the end of the blower. Ensure the blower power switch is turned 'Off'. The blower should be securely affixed to the ground before use. Turn the blower power switch to 'on' and this must be left on at all times while the product is in use. The product should be inflated.

Step 3: Using the water function
Attach the spray nozzles to the velcro at the top beam. Attach the hose to water supply and turn on the water supply when the product is fully inflated.

Step 4 : Affix support stakes to the ground for safety
Ground support stakes are used for lawn ground surfaces. Hook and fit each stake through each loop in the product and push stakes firmly into the soil to ensure the product doesn't lift while  being in use.

Warranty information

Warranty Period - Seams and Stitching
The seams and stitching on your inflatable are covered by a 12 month manufacturer's warranty. Your warranty will start on the day you purchase it.

  • All warranties provided are conditional upon family domestic use of the product and not for rental or other commercial uses
  • All warranties apply to the original purchaser from where the purchase was made & is not transferable 
  • Any modifications made to the inflatable will void the warranty.
  • Our warranty does not apply to ordinary wear & tear of the product.
  • Liability is limited to the faulty part, which will be repaired or replaced at our discretion.
  • The Warranty only applies to purchases made in Australia, and the item must be kept in Australia.
  • The Warranty will be void if the product’s fault arises from abuse, incorrect installation, inappropriate usage, weather related damage or Acts of god.
  • Damage resulting from:- 
    Abuse, misuse, excessive use, failure to follow instructions, improper or abnormal usage; 
    Unauthorised repairs, alterations, or modifications from an unauthorised third party.
     Animals or Pests.
    Nothing in this warranty policy limits or excludes any guarantees, warranties, representations, or conditions implied or imposed by law, including the Australian Consumer Law ("ACL") (or any liability under them) which by law may not be limited or excluded. If you are a "consumer" under the ACL, the following notice applies to you:
  • If the serial number is removed, altered, or defaced, the warranty is void.

Warranty Period - Blower
If your blower does not start, please check the connections and press the reset button on the plug. You may also need to try plugging it into a different outlet. If your blower still does not work, please email sales@happyhopkids.com.au .

Tears are NOT covered by warranty
All inflatable jumping castles and water slides are repairable and patches can be purchased from us or our other retailers. Tears can also be sewn up by needle and strong thread. As the inflatables are assembled by hand, loose outer stitching on the seams of the jumping castles are NOT uncommon, and this is why these products are double stitched and have multiple layers of sewing inside. These will in no way affect the function of your inflatable.

How Do i start a warranty claim

Please supply the below to sales@happyhopkids.com.au

  • your proof of purchase tax invoice - we cannot warranty an item without proof of purchase
  • a valid mobile number
  • Email address
  • Photos of the issue (we may ask for more detailed photos)
  • Photo of the serial number which is located on the yellow tubing

"Our goods come with warranties and guarantees that cannot be excluded under the Australian Consumer Law ("Consumer Guarantees"). You are entitled to a replacement or a refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure."

Or 4 payments of $XX.XX
Write Your Own Review
You're reviewing:Wet & Dry Inflatable Water Zone
Your Rating